盐水喷雾试验机--13501974501 盐水喷雾试验机乃針對各種材質表面處理，包含塗料、電鍍、有機及無機及膜，陽極處理，防銹油，化成處理之耐蝕品質，進而達成製品長時間之耐蝕性。
一、盐水喷雾试验机型号及规格：
1工作室尺寸 W×D×H SH-60: 60×45×40 SH-90: 90×60×50 SH-120: 120×100×50 SH-160: 160×100×60 SH-200: 200×100×60
2试验室温度 NSS/ACSS: 35℃±1℃ CASS: 50℃±1℃
3饱和桶温度 NSS/ACSS: 47℃±1℃ CASS: 63℃±1℃
4电源: AC220V
二、盐水喷雾试验机产品特性：
1PVC一体化外壳及内室; 唯一采用全侦测系统，故障发生时可亮灯显示；
2采用自动加水系统，水位不足时能自动补充水位之功能，试验不中断；
3盐水箱采用隐藏式附水位观察窗；箱盖为透明有机玻璃，保温良好且喷雾状态直视；
4精密玻璃喷嘴PYREX雾气扩散均匀，并自然落于试片，保证连续工作4000小时无结晶盐阻塞；
5附双重超温保护，水位不足警示，确保使用安全；
6温度控制器使用数字显示，PID控制温度，误差±0.3℃；
PV 1210 盐雾腐蚀试验 Body test
Testing is performed according to Section 3.1. Examples are given in Section 3.6. In order to carry out a specific evaluation of cavities, the body can be turned. Before being initially brought into the salt spray test chamber, the body, mounted on the pivoting frame, is preconditioned in the DIN 50014–23/50-2 standard climate, and is then moved into the test chamber kept at a constant temperature. 3.3.1 Salt spray phase
During the test sequence with rotation, before each salt spray cycle, the body is turned about its lengthwise axis so that it is positioned as in the following sequence: 0°,45°,135°,225°and 315°. 3.3.2 Standard climate aging / humid aging at elevated temperature During the cooling-off phase and during humid aging at elevated temperature,the body is positioned horizontally. 3.3.3 Repeating the test cycles
After humid aging at elevated temperature is completed according to Section 3.1,the body is immediately placed in the salt spray test chamber and turned 90°in a clockwise direction to 45°, 135°, 225°or 315°, according to the respective test cycle. 3.3.4 Weekend aging
The rest phase entails aging in the DIN 50014–23/50-2 standard climate,with the body in a horizontal position and placed either in a suitable garage/hall or in the test chamber. 3.4 Component test
The required minimum for complete testing is 5 parts.
The components or their sections are tested in accordance with DIN EN ISO 7253 (see Section 4).
Cavities must be exposed to the salt spray fog by cutting/opening of parts. If necessary, unprotected trim edges must be covered before testing. |
